2.8 inch TFT LCD Touch Screen Display Module Board 320 x 240 Pixel SPI Interface

2.8 inch TFT LCD Touch Screen Display Module Board 320 x 240 Pixel SPI Interface
2.8 inch TFT LCD Touch Screen Display Module Board 320 x 240 Pixel SPI Interface
Product Description: 2.8-inch color screen,support 65K color display,display rich colors; 320X240 resolution, optional touch function; Using the SPI serial bus, it only takes a few...

Artikelnummer

2100159

€ 17,95
Prijs per stuk

Voorraad : 5

Aantal: 
Bestellen
 

Product Description:

  • 2.8-inch color screen,support 65K color display,display rich colors;
  • 320X240 resolution, optional touch function;
  • Using the SPI serial bus, it only takes a few IOs to illuminate the display;
  • Easy to expand the experiment with SD card slot;
  • Provide a rich sample program;
  • Military-grade process standards, long-term stable work;
  • Provide underlying driver technical support.

 

Product Parameters:

Name Parameter
Display Color RGB 65K color
Screen Size  2.8(inch)
Type TFT
Driver IC ILI9341
Resolution 320*240 (Pixel)
Module Interface 4-wire SPI interface
Active Area (AA area) 43.2x57.6(mm)
Module PCB Size 50.0x86.0(mm)
Operating Temperature -20℃~60℃
Storage Temperature -30℃~70℃
VCC power voltage 3.3V~5V
Logic IO port voltage 3.3V(TTL)
Power Consumption TBD
Rough Weight(Package containing) No touch: 34(g) / With touch: 43(g)
 

Interface Definition:

 

Number   Pin Label Description
1 VCC 5V/3.3V power input
2 GND Ground
3 CS LCD chip select signal, low level enable
4 RESET LCD reset signal, low level reset
5 DC/RS LCD register / data selection signal,

high level: register, low level: data

6 SDI(MOSI) SPI bus write data signal
7 SCK SPI bus clock signal
8 LED Backlight control, high level lighting,

if not controlled, connect 3.3V always bright

9 SDO(MISO) SPI bus read data signal, if you do not need to the read function, you can not connect it
(The following is the touch screen signal line wiring, if you do not need to touch function or the module itself does not have touch function, you can not connect them)
10 T_CLK Touch SPI bus clock signal
11 T_CS Touch screen chip select signal, low level enable
12 T_DIN Touch SPI bus input
13 T_DO Touch SPI bus output
14 T_IRQ Touch screen interrupt signal, low level when touch is detected